Emtech-electronics BLU-IR Manuel d'utilisateur télécharger pdf (Page 2)

When power is applied to the BLU-IR, the green LED on both the light

source and receiver will light. When the beam from the light source is

aligned with the receiver, the red LED on the receiver will light. Be sure to

align the sensors on all three axes.

At the rack, the Cat5e cable end needs to be crimped to TIA/EIA 568B

Standards (see below).

EIA/TIA 568B

1. White-Orange

2. Orange

3. White-Green

4. Blue

5. White-Blue

6. Green

7. White-Brown

8. Brown

The rack side cable end should

be plugged into one of the right

hand RJ-45 ports on the back of

the BLU-CIF or BLU-IF.

IR1 IR2 IR3 IR4

(future use)

1 2

Pas de commentaire

Emtech-electronics BLU-IR Manuel d'utilisateur Page 2